My 01 CPI MZ

It's show and tell for your custom scoot! Post photos of your project scooters, etc.

Moderators: SLOWRIDER, Areomyst, scootertrog, mikal

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

My 01 CPI MZ

Postby 2strokd » Tue Apr 20, 2010 8:02 am

Image
Not much for power yet but its fun non the less! :D
The CVT is seriously underestimated by some!
01 CPI Misketo MZ49cc to70 to103cc-Drag scooter
03 Kymco Cobra (SF10)49cc- Daily driver

User avatar
scootertrog
Posts: 1515
Joined: Thu Jul 12, 2007 1:25 pm
Location: SW Missouri

Postby scootertrog » Tue Apr 20, 2010 11:09 am

More pics? Do you not use a seat to sit on?

I had an '02 Mz RX50, it was my first scoot.

scootertrog

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Tue Apr 20, 2010 3:56 pm

Heres a few. I stripped an extra seat i had just for race use.
Image
Image
Image

Heres a little vid of it outta tune with a new set-up.
Image
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

Timmy
Posts: 217
Joined: Tue Sep 02, 2008 3:01 pm
Location: Dearborn Heights MI

Postby Timmy » Tue Apr 20, 2010 6:01 pm

2strokd wrote:Heres a few. I stripped an extra seat i had just for race use.
Image
Image
Image

Heres a little vid of it outta tune with a new set-up.
Image



2stroked nice cpi mz and i really like the front faring on there looks killer.What kind of performance pipe are you using?
2003 Aprilia sr 50 ditech Autism edition
1999 Derbi Mathattan Hunter

Sold
2001 Honda Elite Sa
2004 Yamaha Zuma
1979 Honda pa 50 1

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Wed Apr 21, 2010 8:03 am

Thanks Timmy, i see you also have a DiTech. Great rides, such good mileage!
In the vid im running a lil Leo ZX, but i have a good custom built pipe from 190mech that i will be running later 8)
Image
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

Timmy
Posts: 217
Joined: Tue Sep 02, 2008 3:01 pm
Location: Dearborn Heights MI

Postby Timmy » Wed Apr 21, 2010 11:40 am

2strokd wrote:Thanks Timmy, i see you also have a DiTech. Great rides, such good mileage!
In the vid im running a lil Leo ZX, but i have a good custom built pipe from 190mech that i will be running later 8)
Image



Thanks for the comment 2 stroked.What is the custom pipe from 190 mech from and what cyilnder is it suppose to run 50cc 70cc?
2003 Aprilia sr 50 ditech Autism edition
1999 Derbi Mathattan Hunter

Sold
2001 Honda Elite Sa
2004 Yamaha Zuma
1979 Honda pa 50 1

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Thu Apr 22, 2010 7:56 am

The pipe is a custom one off that 190mech (member here) built for me.
Its built for a 70cc, port timing set at 195/135. It should do well up to about
11,000-12,000 RPM. 190mech is very good at building pipes, it takes skill and knowhow. Its over my head. Thanks 190mech! I believe this pipe was his third one. All hand cut and rolled!
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Mon Jun 07, 2010 10:37 pm

A little update. Running strong with Polini Corsa Sport kit, 190mech,s TINMAN pipe, and the rest of the goodies....Put on the 12inch wheels ive been wanting to put on. I like em lots better than the 10,s overall! Need new tires tho bad! Here it is with the Leo still on.
Image

And here it is with the TINMAN
Image
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Fri Jun 11, 2010 1:14 pm

Under the hood Image
Image

Oil for fill-ups and a flashlight is all i carry :-/. Ohh, and my airfreshener of course Image
Image

Skeedr with Mikes 07 DiTech
Image

Check out the Stage6 rotor :o
Image
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

User avatar
F10Pilot
Posts: 275
Joined: Thu Apr 03, 2008 6:22 pm
Location: Maine

Postby F10Pilot » Fri Jun 11, 2010 3:47 pm

That custom pipe KILLS!!

What cylinder are you using with it? How does it run?

I agree the giant brake rotor is sweet but nothing beats the rockstar factor of a one off exhaust. Is it all rolled mild steel? What gauge?
Malaguti F10 - Flies like a butterfly - Sounds like a bee.

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Fri Jun 11, 2010 11:15 pm

Thanks F10Pilot :D ! I gotta agree, that lil pipe rocks!
Its a one off built by 190mech. I run it with a box stock Polini
Corsa Sport and im very impressed with how it runs!
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Mon Jul 26, 2010 8:20 am

I worked on my cvt a bit to try and get the launch better. I still need to port match the "box stock" Corsa Sport exhaust port to match the C-17 header flange. I think it pulls pretty good for what it is. What do you all think?
http://www.youtube.com/watch?v=MQwovgpy268
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

190mech
Posts: 279
Joined: Thu Oct 01, 2009 8:15 pm

Postby 190mech » Mon Jul 26, 2010 8:00 pm

Tune on!You have the magic touch with the CVT system!! :D

User avatar
2strokd
Posts: 842
Joined: Wed Oct 28, 2009 8:08 am
Location: Lafayette IN

Postby 2strokd » Tue Jul 27, 2010 1:33 pm

Thanks 190mech :D ! That pipe sure has allot to do with it :wink:
I was able to test some in a very short area...Ran a few 0-30MPH runs and it went like this
1st run. Wheel came up(messes the test up) and went 2.95sec.
2nd run. 2.65sec.
3rd run. 2.36 seconds.
Im happy with that!
The CVT is seriously underestimated by some!

01 CPI Misketo MZ49cc to70 to103cc-Drag scooter

03 Kymco Cobra (SF10)49cc- Daily driver

190mech
Posts: 279
Joined: Thu Oct 01, 2009 8:15 pm

Postby 190mech » Tue Jul 27, 2010 8:11 pm

Need to fab up some wheelie bars for the strip!! :lol:


Return to “Scooter Showroom”

Who is online

Users browsing this forum: No registered users and 2 guests